Jiangsu Changzhou Sutai Electrical Appliance Co.,Ltd
The best comes from the best understanding
Add to Cart
stepper motor driver tb6560(m542) 1.5A-4.5A
Port instructions
| ST-M542 Driver Pin Port Description | |
| PUL+ | Positive signal input terminal , connect +5V |
| PUL- | Pulse signal input port |
| DIR+ | Positive signal input terminal , connect +5V |
| DIR- | Direction input signal port |
| ENA+ | Positive signal input terminal , connect +5V |
| ENA- | Enable inputs |
| A+ A- B+ B- | Connect two-phase hybrid motor windings |
| DC+ DC- | Input voltage DC 24-40VDC |
| SW1~SW3 | Drive current portfolio setting |
| SW4 | Full flow semi-flow setting |
| SW5~SW8 | Drive Subdivision combination setting |
Note : 1,When the input signal is greater than 5V , Need PUL, DR,ENA front end of resistance , General 12V plus 1.2K, 24V plus 2K resistance
Current setting
| SW1 | SW2 | SW3 | Current(A) |
| ON | ON | ON | 1.5 |
| OFF | ON | ON | 2.0 |
| ON | OFF | ON | 2.4 |
| OFF | OFF | ON | 2.8 |
| ON | ON | OFF | 3.2 |
| OFF | ON | OFF | 3.7 |
| ON | OFF | OFF | 4.2 |
| OFF | OFF | OFF | 4.5 |
Subdivision setting (SW5-SW8)
| SW5 | SW6 | SW7 | SW8 | subdivision |
| ON | ON | ON | ON | 2 |
| ON |
Inquiry Cart
0
|